Viper 3606V Bedienerhandbuch PDF herunterladen (Seite 52)

QRN3X06 2013-08

Programming System Features

The System Features Learn Routine dictates how the unit operates. It is possible to

access and change most of the feature settings using the control center button.

1. Open a door.

2. Turn the ignition on, then off.

3. Select a Menu. Press and hold the control center button. The number of siren

chirps indicates the menu number. 1 chirp indicates menu 1, 2 chirps - menu

4. When the desired menu chirps are heard, release the control center button.

5. Select a Feature. Press and release the control center button the number of

times corresponding to the feature you wish to change. Then press and hold

one more time to select the features.

6. Program the Feature. While holding the control center button, you can

program the feature using the remote control.

For features with only two options;

= option 1 while = option 2.

For features with more than two options;

selects the options in ascending order,

while

selects them in descending order.

Note:

Pressing button resets the feature to the factory default.

Once a feature is programmed:

• Other features can be programmed within the same menu

• Another menu can be selected

• The learn routine can be exited if programming is complete

To access another feature in the same menu:

1. Press and release the control center button the number of times necessary to

advance from the feature you just programmed to the next one you want to

program.

2. Then press the control center button once more and hold it.

To select another menu:

1. Press and hold the control center button.

2. After 3 seconds, the unit advances to the next menu and the siren chirps, indi-

cating which menu has been accessed.

The learn routine exits if any of the following occurs:

• The open door is closed

• The ignition is turned On

• There is no activity for 30 seconds

• The control center button is pressed too many times

Bitwriter - Only Options

If programming with the Bitwriter®, the learn routine can be locked or un-

locked. If the learn routine has previously been locked, it must be unlocked

with Bitwriter® - this cannot be done manually with the control center but-

ton.

The Bitwriter®

gives you access to a wider range of system options. These

features and the adjustments that may be programmed are described under the

Bitwriter section in the full online guide.

Feature Menus

Default settings are in bold type (Opt. 1).

Menu 1

Item

Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+

System Arming Mode

Active

Passive

Arm – no

lock

Passive

Arm & lock

Auto

Re-arm - no

lock

Auto

Re-arm &

Lock

Panic Mode

Ignition Off

Only

Off

Conﬁrmation Chirps

On - Warn

chirps on

On - Warn

chirps off

Off - Warn

chirps on

Off - Warn

chirps off

Siren Duration

30 sec.

60 sec.

Ign-controlled Locks

No Ign-

locking

Lock &

Unlock

Lock Only Unlock

Only

Door Lock Pulses

Single

Double

Unlock

Only

Double

Lock Only

Double

Lock &

Unlock

Door Lock Output

Duration

0.8 sec.

3.5 sec. 0.4 sec.

2nd Unlock**

2nd unlock

on Ign-

control after

ﬁrst unlock

2nd unlock

on Ign-

control with

ﬁrst unlock

Comfort Closure

No Comfort

Closure

Comfort

Closure 1

Comfort

Closure 2

10 Horn Function

Full Alarm

Only

Siren Func-

tion 20 ms

Siren Func-

tion 30 ms

Siren

Function

40 ms

Siren Func-

tion 50 ms

11 Hood Switch type

Normally

Open

Normally

closed

12 Trunk Switch Type

Normally

open

Normally

closed

Door Switch Type

Normally

open

Normally

closed

Immobilizer Type

Normally

Closed

Normally

Open

Sensor Trigger

Single

sensor

Double

sensor

Nuisance Prevention

Off

Flex Relay

Dome

Horn Trunk

release

VRS

Off

On -

Disarm

chirps off

On -

Disarm

chirps on

19 Remote Button unlock

(Ign off) *

Off

* Not applicable to the 1-way remote control.

** Requires 2nd unlock option to be set for an Aux channel.

Menu 2

Item

Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+

1 One-time Bypass

One time

bypass

Off

One time

bypass On

2 Override Pulse count

2345

3 Door Trigger Error

Chirp

Off

4 Ign-controlled Dome

light

Off

5 OEM Alarm Disarm

w/Aux-Trunk

Off

6 OEM Alarm Disarm

Output

With

Unlock

Before

Unlock

Remote

Start Only

7 OEM Alarm Disarm

Pulses

8 Aux/Trunk Output type

Validity

Off OEM

Alarm Arm

2nd

unlock

9 Aux/Trunk

Linking

No Linking

Link to Arm Link to

Disarm

Link to

Arm/

Disarm

10 Aux 1 Output type

Validity

Latch Latch/

reset/ign

Timed Off (5) OEM

Alarm Arm

(6), 2nd

Unlock (7),

Remote Start

Report (8)

11 Aux 1 Linking

No Linking

Link to Arm Link to

Disarm

Link to

Arm/

disarm

12 Aux 2 Output Type

Validity

Latch Latch

reset/ign

Timed Off (5) OEM

Alarm Arm

(6), 2nd

Unlock (7),

N/O Door

Switch (8),

N/C Door

Switch (9)

13 Aux 2 Linking

No Linking

Link to Arm Link to

Disarm

Link to

Arm/

Disarm

14 Aux 3 Output Type

Validity

Latch Latch

reset/ign

Timed Off (5) OEM

Alarm Arm

(6), 2nd

Unlock (7),

N/O Door

Switch (8),

N/C Door

Switch (9)

Aux 3 Linking

No Linking

Link to Arm Link to

Disarm

Link to

Arm/

Disarm

Aux 4 Output Type

Validity

Latch Latch

reset/ign

Timed Off (5) OEM

Alarm Arm

(6), 2nd

Unlock (7),

N/O Door

Switch (8),

N/C Door

Switch (9)

Remote Start

Report (10)

Aux 4 Linking

No linking

Link to Arm Link to

Disarm

Link to

Arm/

Disarm

Remote Start Button

Control

None

Aux 1 Aux 4

Reset and Delete

To reset the features/virtual tach or delete remote controls follow this procedure:

1. Open at least one vehicle door

2. Turn the key to the ON position

3. Within 5 seconds press and release the control button: 2 times to delete re-

motes, 3 times to reset the features to default.

4. Once you have selected the function step, press the control button once more

and hold it. The LED will ﬂash and the siren will chirp to conﬁrm the functional

step chosen. Release the control button.

5. Press the

button of a programmed remote control. The siren will chirp con-

ﬁrming the feature has been reset/deleted.

Note

: Deleting a remote control does not reset the features, resetting the features

does not delete remote controls.

Reset/delete will exit if:

• The ignition is turned off

• The open door is closed

• 60 seconds lapses with no actions.

Remote Pairing

Prepare the vehicle system to be Paired with a new remote

1. Open at least one vehicle door.

2. Turn the key to the ON position.

3. Within 5 seconds press and release the Control button on the Control Center

one time.

4. Within 5 seconds, press and hold the Control button on the Control Center.

The status LED begins ﬂashing in single ﬂash sequence and the siren chirps

once to conﬁrm the system is ready for remote pairing. Release the button.

5. Locate your remote control model below and follow the instructions.

System Pairing will exit if:

• The ignition is turned off

• The open door is closed

• 60 seconds lapses with no actions

Note

: Make sure the remote to be paired with the system is set for the desired Car

1 or Car 2 operation.

LCD Remote Control:

1. Press and hold the

button for 8 seconds, the remote beeps once,

Main Menu

is displayed. Release the button.

2. Press the AUX or

buttons until

Pair

is displayed.

3. Press and hold the

button until the remote beeps 3 times then release the

button. The remote is now ready to pair with the system.

4. Press the

button.

5. Wait several seconds for feedback as the remote generates a security encryp-

tion and sends it to the Control Center. If pairing is successful the siren chirps

and the remote emits several tones. The screen displays if the Pairing is success-

ful or failed with corresponding text. If pairing fails repeat step 4.

To exit pairing mode on the remote:

• Press and release the

button.

• Wait 30 seconds without pressing a command button on the remote.

Responder LED or Companion Remote Control:

1. Press and hold the

button for 8 seconds. The transmit LED will come on

solid. Release the

button.

2. Press and hold the

until the transmit LED ﬂashes 3 times then comes on

solid.

3. Press the

button.

4. Wait several seconds for feedback as the remote generates a security encryp-

tion and sends it to the Control Center. If pairing is successful the siren will chirp

and the 2-way remote will emit several tones (the companion remote does not

generate tones). If pairing is not successful press and release the

button

once and then repeat steps 2 and 3.

To exit pairing mode on the remote:

• Press and release the

button once, then press and hold until the transmit

LED shuts off.

• Wait 30 seconds without pressing a command button on the remote control.

Note: See Owner’s guide for more details.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57

Kommentare zu diesen Handbüchern

Keine Kommentare

Viper 3606V Bedienerhandbuch Seite 52

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Viper 3606V