Viper 3606V Bedienerhandbuch PDF herunterladen (Seite 21)

Alarm Report

If the alarm was triggered while armed, it will be reported when

the alarm is disarmed via siren chirps, parking light and control center

LED ﬂashes. The siren chirps four times (or ﬁve times if NPC On*), the

parking lights ﬂash three times, and the control center LED ﬂashes in

groups to indicate the last two zones that were triggered (see Table of

Zones). The report output will repeat for each disarm operation until

the ignition is turned on.

* See Nuisance Prevention (NPC) for more details.

Table of Zones

Zone # (led flashes) Zone Name

1 Trunk

2 Shock Sensor

3 Door

4 Sensor 2

5 Ignition

6 Hood

Nuisance Prevention (NPC)

NPC monitors all alarm zones and, if any are triggered excessively,

bypasses them until corrected. If a point of entry (trunk, hood, door)

is left open following a forced entry, it is bypassed. It becomes active

again only after being closed.

Bypassed sensors automatically reset after one hour and after the

vehicle is driven. Disarming then re-arming the alarm does not reset

bypassed sensors.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 32 33

Keine Kommentare

Viper 3606V Bedienerhandbuch Seite 21