Viper 320HV Installationsanleitung PDF herunterladen (Seite 30)

3300

33 IIGGNNIITTIIOONN--CCOONNTTRROOLLLLEEDD DDOOOORR LLOOCCKK//UUNNLLOOCCKK OONN//OOFFFF::

When turned on, the doors will lock three seconds after

the ignition is turned on and unlock when the ignition is turned off. If the ignition key is turned on while the

vehicle door(s) are open, the door(s) will not lock.

44 AACCTTIIVVEE//PPAASSSSIIVVEE LLOOCCKKIINNGG::

If passive arming is selected in Feature 1, then the system can be programmed to

either lock the doors when passive arming occurs, or only lock the doors when the system is armed with the

transmitter. Active locking means the system will not lock the doors when it passively arms. Passive locking

means that the system will lock the doors when it passively arms.

55 DDOOOORR LLOOCCKK PPUULLSSEE DDUUR

RAATTIIOONN::

Some European vehicles, such as Mercedes-Benz and Audi, require longer lock

and unlock pulses to operate the vacuum pump. Programming the system to provide 3.5 second pulses will

accommodate door lock interface in these vehicles. The default setting is 0.8 second door lock pulses. See

Mercedes-Benz and Audi - 1985 and Newer (Type E Door Locks section)

diagram.

66 DDOOUUBBLLEE PPUULLSSEE UUNNLLOOCCKK OOFFFF//OONN::

Some vehicles require two pulses on a single wire to unlock the doors. When

the double pulse unlock feature is turned on, the H2/2 BLUE/BLACK wire will supply two pulses instead of a

single pulse. This makes it possible to directly interface with double pulse vehicles without any extra parts.

NNOOTTEE::

The second unlock output feature (H3/1 BLUE wire) is not available if the double pulse

unlock feature is turned on.

77 SSTTEEAALLTTHH CCOODDIINNGG

™™

TTEECCHHNNOOLLOOGGYY OONN//OOFFFF::

This system features Stealth Coding

™

Technology as an option. Stealth

Coding

™

Technology is a feature that uses a mathematical formula to change the system’s code each time the

transmitter and receiver communicate. This makes the group of bits or "word" from the transmitter very long.

The longer the word is, the easier it is to block its transmission to the unit. Disabling the Stealth Coding

™

Technology feature lets the receiver ignore the Stealth Coding

™

Technology part of the transmitted word. As a

result, the unit may have better range with Stealth Coding

™

Technology off.

88 DDOOOORR SSEENNSSOORR BBYYPPAASSSS CCHHIIRRPP OONN//OOFFFF::

This feature controls the error chirp that is generated if the system is

armed with the door trigger active. This is useful in vehicles that have a long dome light delay after the door

has been closed. If the system is armed before the dome light has turned off, the security system will generate

the door trigger error chirp. If this error chirp is not desired, use this feature to disable the door open error chirp.

If the bypass chirp is turned off, no bypass chirp will be generated, even if a door is accidentally left open.

99 DDoouubbllee PPuullssee LLoocckk..

Selectable 2 pulse door lock output to operate vehicle equipped with factory “deadbolt”.

Will have similar operation to that of the Double Pulse Unlock feature, but will perform the functions on the Lock

wire as opposed to the Unlock wire

1 2 ... 25 26 27 28 29 30 31 32 33 34

Kommentare zu diesen Handbüchern

Keine Kommentare

Viper 320HV Installationsanleitung Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto Alarmanlage Viper 320HV